| 77210B Franke Slewing Ring Bearings | d:20.000 mm; D:42.0000 mm; Fillet Radius ra:0.64 mm; B:24.00 mm; Grease Speed Rating n1:13000 rpm; Basic Static Radial Load Rating Co:11400 N; Basic Dynamic Radial Load Rating C:15600 N; Fillet Radius rb:0.30 mm; Oil Speed Rating n2:17000 rpm; |
| 74118A Franke Slewing Ring Bearings | Stabilizing ring:2 x SR-1615; P120°:45.4 kN; Labyrinth ring:2 x LOR 36; N1:22.225 mm; Ca:64.795 mm; P90°:72.5 kN; J min.:263.525 mm; H:192.088 mm; A2:149.225 mm; Cap bolt recommended tightening torque:298.3 N·m; Cap bolt, SAE grade:8; PG:1/8 NPT; P150°:40.5 kN; h:42.862 mm; R1:60.325 mm; Appropriate attachment bolt size G:0.75 in; Initial grease fill:286.33 g; P60°:121 kN; A1:98.425 mm; |
| 68510A Franke Slewing Ring Bearings | H:99 mm; d:38.1 mm; Basic static load rating C0:19 kN; H2:19 mm; Recommended tightening torque for grub screw:16.5 N·m; A:48 mm; Recommended diameter for attachment bolts, mm G:12 mm; N1:14 mm; Hexagonal key size for grub screw N:4.763 mm; A1:30 mm; A5:23.5 mm; H1:49.2 mm; Mass bearing unit:1.95 kg; L:175 mm; J min.:125 mm; Fatigue load limit Pu:0.8 kN; J7:17 mm; Recommended diameter for attachment bolts, inch G:0.5 in; |
| 68558A Franke Slewing Ring Bearings | A2:273.05 mm; N1:25.4 mm; h:63.5 mm; Housing:SAF 622; da:96.838 mm; End plug (suffix Y):EPR 13; L:466.725 mm; Ca:89.789 mm; Taconite seal:TER 107; H2:60.325 mm; Cap bolt:2 x 1-8 UNC; Initial grease fill:765.45 g; Da:240 mm; ba:48.419 mm; H:287.337 mm; R1:79.375 mm; PG:1/4 NPT; H1:152.4 mm; Max. speed for Taconite seal:775 r/min; R2:36.513 mm; |
| 68623A Franke Slewing Ring Bearings | a:163 mm; Static moment stiffness:1530 N·m/mrad; d:50 mm; Angle between bolts and thread holes α/2:15 °; da min.:63 mm; Basic dynamic load rating C:122 kN; Da max.:98 mm; N:11 mm; Required attachment bolt size (DIN 912):M10; Preload:6750 N; Basic static load rating C0:270 kN; J:113 mm; Angle between holes in outer ring (Pitch) α:30 °; H1:45 mm; d2:76.1 mm; Number of attachment bolts:12; |
| 68949A Franke Slewing Ring Bearings | Fillet Radius ra:1.00 mm; D:125.0000 mm; Accessories:Two Shields; Basic Static Radial Load Rating Co:41500 N; B:22.00 mm; Oil Speed Rating Open/Shielded n2:6300 rpm; Grease Speed Rating Open/Shielded n1:5300 rpm; d:80.000 mm; Basic Dynamic Radial Load Rating C:50700 N; Sealed Speed Rating n3:3200 rpm; |
| 68717A Franke Slewing Ring Bearings | h:94 mm; l7 min.:30 mm; l2 max.:128 mm; r1 min.:0.6 mm; dk:35.5 mm; Specific dynamic load factor K:150 N/mm²; C1 max.:18 mm; G:M 24x2; B:20 mm; Basic static load rating C0:78 kN; Mass rod end:0.53 kg; α:7 °; l1 min.:53 mm; Material constant KM:330; Basic dynamic load rating C:72 kN; d2 max.:65 mm; d:25 mm; |
| 71061A Franke Slewing Ring Bearings | d1:1055 mm; Limiting speed:340 r/min; Reference speed:170 r/min; D:1060 mm; Basic static load rating C0:22000 kN; Da max.:938 mm; r1,2 min.:5 mm; Fatigue load limit Pu:1250 kN; Minimum axial load factor A:39; Mass bearing:150 kg; Basic dynamic load rating C:3050 kN; H:95 mm; B:26.5 mm; d:900 mm; da min.:1022 mm; ra max.:4 mm; D1:905 mm; |
| 68769A Franke Slewing Ring Bearings | S:4.763 mm; P180°:89 kN; A2:317.5 mm; H:377.825 mm; Pa:60.5 kN; Cap bolt, SAE grade:5; Eye bolt:2 x 3/8-16 UNC; P90°:140 kN; J min.:530.225 mm; Appropriate attachment bolt size G:1 in; Initial grease fill:1304.1 g; Housing:SAW 536; H2:76.2 mm; Cap bolt recommended tightening torque:203.4 N·m; P150°:75.6 kN; Stabilizing ring:SR-36-30; Max. speed for Taconite seal:460 r/min; Cap bolt:4 x 3/4-10 UNC; |
| 68641A Franke Slewing Ring Bearings | D:62 mm; d1:43.7 mm; Static axial stiffness, preload class C:67 N/µm; Static axial stiffness, preload class B:49 N/µm; Calculation factor f:1.06; Preload class C GC:370 N; Static axial stiffness, preload class A:31 N/µm; Fatigue load limit Pu:0.28 kN; Calculation factor fHC:1; Mass bearing:0.15 kg; D2:54.85 mm; Number of balls z:17; Calculation factor f1:1; Calculation factor f2A:1; |