| 68526A Franke Slewing Ring Bearings | Calculation factor fHC:1.01; d2:81.6 mm; B:20 mm; db min.:76 mm; d1:84.3 mm; D2:98.6 mm; Calculation factor e:0.68; da min.:76 mm; Calculation factor (single, tandem) Y2:0.87; db max.:80.8 mm; Mass bearing:0.58 kg; a:31.2 mm; ra max.:1 mm; Calculation factor (back-to-back, face-to-face) Y1:0.92; Calculation factor f2B:1.03; rb max.:0.6 mm; Calculation factor f2C:1.06; Preload class B GB:610 N; Attainable speed for grease lubrication:18500 r/min; |
| 74108A Franke Slewing Ring Bearings | Dw:3 mm; Lw:11.8 mm; Mass needle roller:0.65 g; r1,2 min.:0.2 mm; r2 max.:0.8 mm; r1 max.:0.6 mm; |
| 66398L Franke Slewing Ring Bearings | Accessories:Without Accessories; Basic Static Radial Load Rating Co:65500 N; d:70.000 mm; Basic Dynamic Radial Load Rating C:69300 N; Oil Speed Rating Open/Shielded n2:5000 rpm; B:24.00 mm; D:125.0000 mm; Fillet Radius ra:1.50 mm; Grease Speed Rating Open/Shielded n1:4100 rpm; |
| 77234A Franke Slewing Ring Bearings | P180°:94.3 kN; J min.:441.325 mm; RG:3/4 NPT; Housing:SAF 038 KA; P150°:78.3 kN; H1:169.875 mm; A1:158.75 mm; Labyrinth ring:2 x LOR 155; Max. speed for PosiTrac Plus seal:825 r/min; Initial grease fill:793.8 g; Cap bolt, SAE grade:5; L:558.8 mm; Cap bolt:4 x 3/4-10 UNC; P60°:226 kN; N1:28.575 mm; R2:33.337 mm; R1:104.775 mm; Mass pillow block:90.7 kg; Cap bolt recommended tightening torque:203.4 N·m; |
| 68314A Franke Slewing Ring Bearings | da max.:130.5 mm; Design (sliding contact surface combination):Steel/steel, heavy-d; Mass plain bearing:9.8 kg; Da max.:171 mm; Basic dynamic load rating C:1120 kN; Lubricant:Regular relubricatio; M:8 mm; Material constant KM:330; C:85.725 mm; r1 min.:1 mm; Specific dynamic load factor K:100 N/mm²; b:11 mm; r2 min.:1.1 mm; ra max.:1 mm; da min.:122.5 mm; Sealing solution:Triple-lip seals; Specific static load factor K0:300 N/mm²; |
| 74138A Franke Slewing Ring Bearings | Static (Cor):186.000 kN; Bearing designation:6324M ; D:260 mm; B:55 mm; Weight:14.5 kg; da:133 min; ra:2.5 max; rs:3 mm; Da:247 max; d:120 mm; Oil:3 000 min-1; Dynamic (Cr):208.000 kN; Pu:6.134 kN; Grease:2 400 min-1; |
| 67507A Franke Slewing Ring Bearings | Mass adapter sleeve assembly:211 kg; A:8 mm; G3:13 mm; d:750 mm; B5:112 mm; Hydraulic nut:HMV 150E; G2:G 1/8; d3:870 mm; d1:710 mm; B:90 mm; B1:291 mm; G:Tr 750x7; |
| 77276A Franke Slewing Ring Bearings | Mass angle ring:0.3 kg; B2:18 mm; d:65 mm; d1 ≈:90.65 mm; B1:10 mm; r3,4 min.:2.1 mm; |
| 68717A Franke Slewing Ring Bearings | h:94 mm; l7 min.:30 mm; l2 max.:128 mm; r1 min.:0.6 mm; dk:35.5 mm; Specific dynamic load factor K:150 N/mm²; C1 max.:18 mm; G:M 24x2; B:20 mm; Basic static load rating C0:78 kN; Mass rod end:0.53 kg; α:7 °; l1 min.:53 mm; Material constant KM:330; Basic dynamic load rating C:72 kN; d2 max.:65 mm; d:25 mm; |
| 68635A Franke Slewing Ring Bearings | Associated spanner:TMFN 600-750; B5:112 mm; b:55 mm; Associated eyebolt for handling:M 12; Mass lock nut:85.5 kg; h:25 mm; G:Tr 750x7; d3:870 mm; d1:820 mm; d2:782 mm; B:90 mm; B3:20 mm; |